Let try...ps cs5 with tutorial...

1.Step

Start with the document of size of 3000 x 2250 and make a new layer and fill it with the gradient of color
0290c7 to 06b3f5 to 0695ca.

2.Step

Next I add paper texture to the new layer. I desaturate then it and resize to fit the document and reduce the opacity to “28%” and blending mode to “Multiply” and erase some of the parts. You can find different types of textures on the net and also you can download this texture from the resource pack posted on this tutorial.

3.Step

Next make a new layer and take a large Soft edge brush of size and "800-1000px" reduce the flow to 5-7% and start brushing on the corners of the document and change the blending mode to “Soft light“.

4.Step

Then add a new Adjustment layer of color filter layer of “Cooling filter(82)”. Opacity reduce to “60%“.

5.Step

Its time to place our model or you can choose any picture of your choice. For cutout I generally use Pen tool, simply place points around the model and then Right-click and select Make selection with 0/1 radius. You can find different techniques, just Google it.

6.Step

Duplicate the image and flip vertical and place at the bottom to add shadow effect and reduce the opacity, see image below:

7.Step

Lets add more shadow to the image, make a new layer above model shadow layer and take a Soft edge brush of “20px” and follow,to 5-10% and start brushing around its shoes.

My final result look like this. You can add a Gaussian blur also to the shadow, play with the opacity bar to have natural look to the shadow.

8.Step

Make a new layer behind the model layer and take a large white Soft-edge brush and flow to “20-30%” paint it behind him and then make the size a bit smaller and choose color aae6fc with flow “15-20%”
And paint it again.
My result look like this (see image below):

9.Step

Next I add some clouds behind the model, you can download different types of cloud brushes from the deviantart or use mine from the resource pack posted on this tut. Make a new layer behind the model and above the white layer which I made in step 8 and start brushing different clouds with white color where ever it looks good.

10.Step

Next I add stars and galaxy to the back ground. I search on the Internet for the galaxy and stars pictures and I found this one. You can too download it from resources pack. I have attached all the stock images, brushes which I used in the resource pack. Drag it to your canvas and reposition it to fit the size of the document and place it behind the model, see the image below. Change the blending option to “Color dodge” and a layer mask by hitting “add layer mask button” at the bottom of the layers palate, and start brushing with white to remove unwanted areas.

My area masked area look like this .Next I just add birds to the sky.

11.Step

Now go to your model layer ctrl + click the model layer to select the model and then make a new layer then go to Edit -> Stroke and change the following settings:

You can choose stroke path to 1px or 3px in my case I chose 2px. As soon as you hit ok you will get a stroke path around the models body and now select Move tool and move that path slightly upwards.
Reference image below.

12.Step

Repeat the above process again but this time choose different color, I chose bright yellow color and move it to the right of the model and erased stroke where I don’t like.

13.Step

Next I add some 3d abstracts behind the model. I find nice 3d abstracts and renders on Deviantart, there is a huge collection of abstract designs on the Internet. You can find abstracts which I used in this tut in the resource pack. Now just drag this image “3cerc4d” to your canvas and place it behind the model and resize it.

Note: When you drag a image in CS4 and CS5, the image will always open as a smart object see the image below the symbol of the smart object highlighted in a circle. To edit an image you have to convert it to rasterize layer by right-click the selected layer and click rasterize layer button.

14.Step

Now Add a layer mask to the layer and start brushing the areas which are not looked good, see my result below:

15.Step

Next I duplicate this abstract twice and Free transformed and placed at different position. Try to experiment with it and repositioned it where it looks good and finally add a layer mask and remove parts which you think not looking good.

16.Step

Next I add more abstract designs, place this image “render by k3-studio copy 3” to your canvas resize it and placed it behind the model.

17.Step

Next I duplicate abstract which I used in the above step and resize it and placed at different positions. For some abstract I changed the color by using Image -> Adjustment -> Hue/saturation and hit colorize button and do the following settings:

My result after placing all the abstracts is look like this:

18.Step

Next I add more depth to the image. Create a new layer below the abstracts layers and select Elliptical marquee tool and make a circle by holding shift key and fill it with black color.

Drag this circle behind the model’s head, see image below:

19.Step

Again make a new layer and this time we are going to make triangles with the help of Polygon tool (U). You have to enter the sides for the polygon ex. 3 for triangle, 4 for square…..etc.

After selecting the Polygon tool make sure that “paths” tab is selected see above picture and after drawing the path (I mean to say triangle), right–click and select fill path and fill with bright yellow. Finally select Pen tool and right–click and delete path.

20.Step

Next I made different sizes of triangles and place them over big black circle, look the image below for reference. Similarly I repeated these step once for another group of circle and triangles but this slightly smaller near his foot. You can do one thing also select the triangles and circle layers duplicate them resize it and place it.

21.Step

This time I will add some curve lines, select Pen tool and make a new layer, draw a curve path as shown in the image below and make stroke path of hard brush size of “30-35px” without simulate pressure setting unchecked.

22.Step

Next we will edit this line in Liquify tool ( go to Filter -> Liquify). A new window will open which look like this:

And I use these tool which I mentioned in the above picture with different sizes, density and pressure.

First select forward Wrap tool (W) and settings to default i.e (size, density, pressure = 100, 50, 100) start click and drag to deform the line. Use Twirl tool, Bloat tool with different settings and feel free to experiment.

My result looks like this:

23.Step

Then I applied Layer styles -> Inner glow.

Color – f27457; Blend mode – Linear dodge; Size – 9.

24.Step

I repeat the above two steps (22, 23) for more lines.

Similarly add 2-3 more lines but this time with black in color.

25.Step

Make a new layer and draw lines (lines should have a curve like it is hanging) one white and one black, see image below.

And then I place a bird on the line

26.Step

Now this time we add some text like it is hanging on it. Download the resource pack of this tutorial in that you will find Clothes clip open it up and place it into the canvas. After this write letters of “DANCE” on different layers and place it like I did. See the image below:

27.Step

Lets add some more lights make a new layer and take a Soft edge brush of color “f6e126“, size “200px” and brush it to his hand and elbow , repeat the process but this time take white soft edge brush slightly smaller and decrease the flow to “80-90%“.

28.Step

It is almost completed, lets add more lines and shapes, make a rectangle (this layer should behind the model’s layer) and fill it with yellow color (ffff00) then hit Ctrl +T to Free transform, right + click and select perspective and change like I did in the second image below and place it near his shoes.

Then pick the Pen tool to make strokes of 1px around the yellow box with white and finally brush with Soft edge brush flow to “20%” around the corners of the box.

Similarly I add two more box, simply by duplicating the first one and resizing them. You can group them in a folder by selecting the layers which you want to group and hit Ctrl + G.

29.Step

Lets add more shapes this time to the background make a new layer and select Pen tool start create polygon shapes and make selection by right-click and select “make selection”, select Gradient tool fill it with white to transparent, blending option – “Screen“, opacity – “30%“.

My result:

30.Step

Next add lines with the help of Pen tool or Pencil tool. Take a pencil of “2px“, color – “white“, opacity – “30%“.

31.Step

Final adjustments to the image. Select your model layer and add Hue/saturation adjustment layer, make sure to check “use previous layer as clipping mask” box.

Hue: +1; Saturation: -26; Blending: soft light; Opacity: 73%.

Next add Color balance adjustment layer and do the following changes.

Change the Blending option to Dissolve.

32.Step

Add one more adjustment layer, this time selective layer, we will going to select blacks and do the following changes:

33.Step

Finally make a new layer above all layers. Then go to Image -> Apply image and hit OK. Go to Filter -> Sharpen image upto “1.2 px“.

Final Result: A Stylish Dancer Photo Manipulation